Panasonic BM-ET330 Manuel d'utilisation - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic BM-ET330. Panasonic BM-ET330 37 pages. Iris reader

OPERATING PROCEDURES (INSTRUCTIONS FOR IRIS READER USERS)

This section explains how to use the iris reader, enroll the iris data in the iris server, and recognize yourself with a recognition

iris reader in the following order.

This is a fundamental operating procedure. Please read here before enrollment and recognition to facilitate the operating

procedures.

• How to carry out enrollment

For iris recognition, you need to make the iris reader capture your iris image and enroll your iris data in the iris server. This

procedure explains how to enroll the iris data in the iris server using the iris reader. Follow the direction of system

administrators or operators when you carry out iris data enrollment.

• How to carry out recognition

This procedure explains how to recognize yourself with the iris reader after enrollment.

• How to recognize yourself with the iris reader and a card reader

This procedure explains how to recognize yourself with the iris reader and a card reader after enrollment.

■ How to Position Your Eyes in the Mirror

This iris reader captures the iris data of both eyes at one time. If the eyes are not positioned within the capturing range,

enrollment/recognition will be invalid. Before enrollment/recognition, you (the user) should stand in front of the iris reader as

follows and adjust your eye position. Even when you carry out enrollment/recognition while sitting, you should adjust your eye

position in the same way.

Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the upside limit, get on a

pedestal, etc.

1. Stand where you can see the iris reader

from the front side.

Stand where you can hold the tilt handles with your

arms bent moderately. If you are standing within the

recognition range, an ellipse symbol will appear at the

centre of the mirror.

• The recognition range is within approx. 30 cm to

40 cm {0.98 ft. to 1.32 ft.} away from the iris read-

er.

• The recognition area differs depending on users.

However, the approximate recognition area is

where you can stand holding the tilt handles with

your arms bent moderately.

35 °

15 °