Panasonic BM-ET330 Kullanım Talimatları Kılavuzu - Sayfa 23
Dijital Kamera Panasonic BM-ET330 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic BM-ET330 37 sayfaları. Iris reader
Sayfayı Yazdır
OPERATING PROCEDURES (INSTRUCTIONS FOR IRIS READER USERS)
This section explains how to use the iris reader, enroll the iris data in the iris server, and recognize yourself with a recognition
iris reader in the following order.
• How to position your eyes in the mirror
This is a fundamental operating procedure. Please read here before enrollment and recognition to facilitate the operating
procedures.
• How to carry out enrollment
For iris recognition, you need to make the iris reader capture your iris image and enroll your iris data in the iris server. This
procedure explains how to enroll the iris data in the iris server using the iris reader. Follow the direction of system
administrators or operators when you carry out iris data enrollment.
• How to carry out recognition
This procedure explains how to recognize yourself with the iris reader after enrollment.
• How to recognize yourself with the iris reader and a card reader
This procedure explains how to recognize yourself with the iris reader and a card reader after enrollment.
■ How to Position Your Eyes in the Mirror
This iris reader captures the iris data of both eyes at one time. If the eyes are not positioned within the capturing range,
enrollment/recognition will be invalid. Before enrollment/recognition, you (the user) should stand in front of the iris reader as
follows and adjust your eye position. Even when you carry out enrollment/recognition while sitting, you should adjust your eye
position in the same way.
Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the upside limit, get on a
pedestal, etc.
1. Stand where you can see the iris reader
from the front side.
Stand where you can hold the tilt handles with your
arms bent moderately. If you are standing within the
recognition range, an ellipse symbol will appear at the
centre of the mirror.
• The recognition range is within approx. 30 cm to
40 cm {0.98 ft. to 1.32 ft.} away from the iris read-
1
er.
• The recognition area differs depending on users.
However, the approximate recognition area is
where you can stand holding the tilt handles with
your arms bent moderately.
35 °
15 °
23