Panasonic DMC-F3P Manuel d'entretien - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Panasonic DMC-F3P. Panasonic DMC-F3P 47 pages. User manual
Également pour Panasonic DMC-F3P : Spécifications (2 pages), Manuel d'utilisation de base (28 pages)

Panasonic DMC-F3P Manuel d'entretien
8.3.

Execute the Adjustment software "DscCalDi.exe".

Step 1.Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
2. Set the [ REC/PLAY ] switch to "REC" mode.
3. Set the recording mode to [ Normal Picture ] mode.
• Turn on the power switch and then press the "MODE" button.
• Choose the [ Normal Picture ] mode with cursor buttons, then press the "MENU/SET" button.
• Turn the power switch to OFF.
4. Connect the Camera unit and a PC with a USB cable.
5. Turn the power switch to ON.
6. Select the USB mode to "PC" mode, then press the "MENU/SET" button.
(NOTE: Right after replacing the MAIN P.C.B., the USB selection screen does not displayed.)
Step 2.Execute the software "DscCalDi" :
1. Choose the "Adj Soft (DscCalDi)" and execute the adjustment software.(Refer to Fig.E1:Connection)
[ "Start" ---> "Program(P)" ---> "Win Tatsujin" ---> "Dsc" ---> "DMC-F3,F4 series" ---> "Adj Soft (DscCalDi)" ]
The following main screen is appear on the PC monitor.
NOTE:
Without connecting the USB cable between DSC (USB mode with power on) and PC, adjustment software does not exe-
cuted.
Now, perform the necessary adjustment by ordering each adjustment procedures described in "8.4 Adjustment procedures" sec-
tion, continuously.
28