Panasonic DMC-F3P 서비스 매뉴얼 - 페이지 28

{카테고리_이름} Panasonic DMC-F3P에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-F3P 47 페이지. User manual
Panasonic DMC-F3P에 대해서도 마찬가지입니다: 사양 (2 페이지), 기본 사용 설명서 (28 페이지)

페이지 인쇄

8.3.

Execute the Adjustment software "DscCalDi.exe".

Step 1.Preparation:

1. Attach the Battery or AC Adaptor with a DC coupler to the unit.

2. Set the [ REC/PLAY ] switch to "REC" mode.

3. Set the recording mode to [ Normal Picture ] mode.

• Turn on the power switch and then press the "MODE" button.

• Choose the [ Normal Picture ] mode with cursor buttons, then press the "MENU/SET" button.

• Turn the power switch to OFF.

4. Connect the Camera unit and a PC with a USB cable.

5. Turn the power switch to ON.

6. Select the USB mode to "PC" mode, then press the "MENU/SET" button.

(NOTE: Right after replacing the MAIN P.C.B., the USB selection screen does not displayed.)

Step 2.Execute the software "DscCalDi" :

1. Choose the "Adj Soft (DscCalDi)" and execute the adjustment software.(Refer to Fig.E1:Connection)

[ "Start" ---> "Program(P)" ---> "Win Tatsujin" ---> "Dsc" ---> "DMC-F3,F4 series" ---> "Adj Soft (DscCalDi)" ]

The following main screen is appear on the PC monitor.

NOTE:

Without connecting the USB cable between DSC (USB mode with power on) and PC, adjustment software does not exe-

cuted.

Now, perform the necessary adjustment by ordering each adjustment procedures described in "8.4 Adjustment procedures" sec-

tion, continuously.