HP ProCurve 1600M Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HP ProCurve 1600M. HP ProCurve 1600M 28 pages. Redundant power supply
Également pour HP ProCurve 1600M : Fiche technique (12 pages), Lisez-moi d'abord (8 pages), Manuel du réviseur (27 pages), Manuel complémentaire (2 pages), Manuel complémentaire (2 pages), Manuel d'installation (36 pages), Manuel d'installation (28 pages), Manuel d'installation rapide (2 pages), Manuel d'installation rapide (4 pages), Manuel de l'utilisateur (8 pages), Supplément au manuel (28 pages), Lisez-moi d'abord (16 pages), Installation et retrait (2 pages), Manuel d'installation (12 pages), Manuel de planification et de mise en œuvre (40 pages), Instructions de démontage du produit en fin de vie (2 pages), Manuel d'installation (46 pages), Manuel de diagnostic (2 pages), Instructions de démontage (2 pages)

Imprimer la page
HP ProCurve 1600M Manuel d'installation
Descriptions
Link and Mode LEDs
(one pair per port)
2
network ports
Example: The HP Procurve 24-Port 10/100-TX GL Module
Features: The HP Procurve Switch GL Modules have the following features:
auto-enabled ports—the ports are all configured to be ready for network
I
operation as soon as a viable network cable is connected
I
auto-configuration—a default configuration is applied to the module
when the switch is powered on and the module passes self test; this default
configuration works well for most network installations
LEDs that provide information on the link status, network activity,
I
connection bandwidth, and communication mode (half or full duplex)
I
"hot swap" operation—you can add a module or replace a module without
having to shut down the switch (changing the module type in a given slot
does require a switch reset)
the ports on the 10/100-TX GL Module have the HP Auto-MDIX feature,
I
and the ports on the 100/1000-T GL Module have the IEEE 802.3ab Auto
MDI/MDI-X feature. These features operate the same way and allow you
to use either "straight-through" or "crossover" twisted-pair cables for all
the twisted-pair network connections. Please see the note on "Automatic
Cable Sensing" on page 7.
I
standards adherence:
•
the 10/100-TX GL Module is compatible with the IEEE 802.3
10Base-T and IEEE 802.3u 100Base-TX standards
•
the 100/1000-T GL Module is compatible with the IEEE 802.3ab
1000Base-T and IEEE 802.3u 100Base-TX standards
•
the ports on the transceivers that are installed in the Gigabit Trans-
ceiver GL Module are compatible with their appropriate standards.
See the Installation Guide the comes with the transceivers.
retaining screw