HP ProCurve 1600M Manuel d'installation - Page 8

Features

Link and Mode LEDs

(one pair per port)

hp procurve

10/100-TX

gl module

J4862B

Contact your HP-authorized networking products reseller or your HP repre-

sentative for information on availability of other modules, transceivers, and

mini-GBICs. You can also visit the HP networking products Web site at http:/

/www.hp.com/go/hpprocurve to get more information.

Features

10/100-TX Por ts (1-24)

network ports

Example: The HP Procurve 24-Port 10/100-TX GL Module

The HP Procurve Switch GL Modules have the following features:

auto-enabled ports—the ports are all configured to be ready for network

operation as soon as a viable network cable is connected.

auto-configuration—a default configuration is applied to the module

when the switch is powered on and the module passes self test; this default

configuration works well for most network installations.

LEDs that provide information on the link status, network activity,

connection bandwidth, and communication mode (half or full duplex).

"hot swap modules" operation—you can add a module or replace a

module without having to shut down the switch (changing the module

type in a given slot does require a switch reset).

"hot swap transceivers" operation—you can add, replace, or change the

type of any of the transceivers and mini-GBICs that you use in the Gigabit

Transceiver GL Module and mini-GBIC GL Module, without having to first

remove the module, and without having to shut down the switch.

Link|Mode

all por ts are HP Auto-MDIX

retaining screw

module