HP ProCurve J4864A Manuel d'installation - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HP ProCurve J4864A. HP ProCurve J4864A 38 pages. Switch gl modules
Également pour HP ProCurve J4864A : Manuel d'installation (36 pages)
Imprimer la page
Installing the gl Modules
14
Advanced Features: Spanning Tree, Trunking, VLANs, Security, and so
■
forth, all Disabled
•
Trunking for the J4908A is accomplished differently than normal,
therefore you must follow these guidelines.
Looking at the J4908A physical port layout, it looks like this:
1
2
3
4
5
6
7
8
9
10 11 12
The trunking grouping is as follows:
Group1: 1-5, 7-11, 16
Group2: 6, 12-15, 17-22
Ports 21 and 22, which are the two Fiber links, are expected to be trunked
together.
The following graphic depicts the proper trunking.
If necessary, configure the port(s) in the module by using the switch console
or the web browser interface. The command line interface (CLI) will provide
error messages with correct groupings and disallow the trunk configuration
if illegal groups exist.
For more information, see the Management and Configuration Guide
shipped on the documentation CD that came with the switch, and the online
Help provided in the console and web browser interfaces.
If the default port configuration listed above is acceptable for your network,
then skip this process.
13 14
15
16
21
17 18
19
20
22