HP ProCurve J4864A 설치 매뉴얼 - 페이지 21

{카테고리_이름} HP ProCurve J4864A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve J4864A 38 페이지. Switch gl modules
HP ProCurve J4864A에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지)

페이지 인쇄

Installing the gl Modules

Advanced Features: Spanning Tree, Trunking, VLANs, Security, and so

■

forth, all Disabled

•

Trunking for the J4908A is accomplished differently than normal,

therefore you must follow these guidelines.

Looking at the J4908A physical port layout, it looks like this:

10 11 12

The trunking grouping is as follows:

Group1: 1-5, 7-11, 16

Group2: 6, 12-15, 17-22

Ports 21 and 22, which are the two Fiber links, are expected to be trunked

together.

The following graphic depicts the proper trunking.

If necessary, configure the port(s) in the module by using the switch console

or the web browser interface. The command line interface (CLI) will provide

error messages with correct groupings and disallow the trunk configuration

if illegal groups exist.

For more information, see the Management and Configuration Guide

shipped on the documentation CD that came with the switch, and the online

Help provided in the console and web browser interfaces.

If the default port configuration listed above is acceptable for your network,

then skip this process.

13 14

17 18