HP StorageWorks 7110 - Virtual Array Instructions de mise à niveau - Page 8

Parcourez en ligne ou téléchargez le pdf Instructions de mise à niveau pour {nom_de_la_catégorie} HP StorageWorks 7110 - Virtual Array. HP StorageWorks 7110 - Virtual Array 12 pages. Private loop (hubs/direct connect)
Également pour HP StorageWorks 7110 - Virtual Array : Utilisation du manuel (34 pages), Instructions (4 pages), Manuel (4 pages), Manuel (4 pages), Instructions d'installation (2 pages), Manuel (2 pages), Manuel (1 pages), Manuel (1 pages)

Imprimer la page
HP StorageWorks 7110 - Virtual Array Instructions de mise à niveau
Replace the Disk Enclosure LCCs
Set FC Loop Speed Switch (Upgrading a VA 7400 with DS 2405 Disk
Systems)
Install New Disk Enclosures
8
Upgrading a VA 7100/7400 to a VA 7410/7110
If the original VA 7400 array included DS 2400 disk enclosures, the LCCs must
be replaced with DS 2405 LCCs.
1
Remove both LCCs from the disk enclosure.
2
Install the DS 2405 LCCs in the disk enclosure.
When upgrading a VA 7400 that includes DS 2405 Disk Systems, the FC Loop
Speed switch on the disk enclosure LCCs must be set to 2GB/s. Failure to set
the switch on both LCCs in each disk enclosure will disrupt the FC loop and
cause the entire array to malfunction.
If the capacity of the array will be increased by adding additional disk
enclosures, they should be added now.