HP StorageWorks 8B - FC Entry Switch Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 50 pages. Fabric os release notes version 3.0.1b
Également pour HP StorageWorks 8B - FC Entry Switch : Manuel de mise à jour (9 pages), Manuel d'instructions d'installation (20 pages), Manuel de l'utilisateur (22 pages), Notes de mise à jour du micrologiciel (14 pages), Manuel d'installation (14 pages), Note de mise à jour (26 pages), Manuel de l'utilisateur (44 pages), Manuel de l'utilisateur (44 pages), Manuel de l'utilisateur (38 pages), Manuel de l'utilisateur (38 pages), Manuel de l'utilisateur (37 pages), Manuel de l'utilisateur (30 pages), Note de mise à jour (16 pages)

Imprimer la page
HP StorageWorks 8B - FC Entry Switch Manuel

Setting the Initial Configuration

This chapter provides information on initial configuration tasks for a switch.

Logging into a Switch

To log into a switch:
1.
Open a telnet connection to the switch. The login prompt is displayed if the telnet connection
successfully found the switch in the network.
Note:
2.
At the login prompt enter the user ID you are logging in as. For example:
login: admin
The password prompt is displayed if the user exists.
3.
Enter the password for the user:
password: xxxxxx
The default password is password.
4.
If the login was successful a prompt is displayed showing the switch name and user ID you are
logged in as. For example:
switch55>admin:
Fabric OS Procedures Guide
The switch must be connected to your IP network through the RS-232 port to enable
connection through telnet. Refer to the hardware manual of your switch for more
information about connecting the switch to your IP network.
Chapter
1
1-1