HP StorageWorks 8B - FC Entry Switch Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Beralih HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 50 halaman. Fabric os release notes version 3.0.1b
Juga untuk HP StorageWorks 8B - FC Entry Switch: Manual Pembaruan (9 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Pengguna (22 halaman), Catatan Rilis Firmware (14 halaman), Panduan Instalasi (14 halaman), Catatan Rilis (26 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Panduan Pengguna (30 halaman), Catatan Rilis (16 halaman)

Setting the Initial Configuration

This chapter provides information on initial configuration tasks for a switch.

To log into a switch:

Open a telnet connection to the switch. The login prompt is displayed if the telnet connection

successfully found the switch in the network.

Note:

At the login prompt enter the user ID you are logging in as. For example:

The password prompt is displayed if the user exists.

Enter the password for the user:

password: xxxxxx

The default password is password.

If the login was successful a prompt is displayed showing the switch name and user ID you are

logged in as. For example:

switch55>admin:

Fabric OS Procedures Guide

The switch must be connected to your IP network through the RS-232 port to enable

connection through telnet. Refer to the hardware manual of your switch for more

information about connecting the switch to your IP network.

Chapter

1-1