HP StorageWorks director 2/140 Manuel d'instructions d'installation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} HP StorageWorks director 2/140. HP StorageWorks director 2/140 22 pages. Universal port module kit
Également pour HP StorageWorks director 2/140 : Manuel d'instructions d'installation (24 pages)
Imprimer la page
Installation Instructions
Attaching the Mounting Hardware to the Director 2/140
Use these steps to secure the mounting hardware to the Director 2/140.
NOTE: All mounting brackets are attached to the Director 2/140 using 10/32 x 3/8-inch flathead
countersunk Phillips screws.
1. Locate the two front mounting brackets in the shipping carton.
2. Secure the front mounting brackets on either side of the Director, as shown in
Figure
4. For each front mounting bracket, use three screws.
Figure 4: .Securing the front mounting brackets to the Director 2/140
3. Locate the two rear mounting plates in the shipping carton.
4. Secure the two rear mounting plates to each side of the Director, as shown in
Figure
4. For each plate, use three screws.
8
director 2/140 rack mount kit installation instructions