HP StorageWorks director 2/140 Panduan Petunjuk Instalasi - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Beralih HP StorageWorks director 2/140. HP StorageWorks director 2/140 22 halaman. Universal port module kit
Juga untuk HP StorageWorks director 2/140: Panduan Petunjuk Instalasi (24 halaman)
Halaman Cetak
Installation Instructions
Attaching the Mounting Hardware to the Director 2/140
Use these steps to secure the mounting hardware to the Director 2/140.
NOTE: All mounting brackets are attached to the Director 2/140 using 10/32 x 3/8-inch flathead
countersunk Phillips screws.
1. Locate the two front mounting brackets in the shipping carton.
2. Secure the front mounting brackets on either side of the Director, as shown in
Figure
4. For each front mounting bracket, use three screws.
Figure 4: .Securing the front mounting brackets to the Director 2/140
3. Locate the two rear mounting plates in the shipping carton.
4. Secure the two rear mounting plates to each side of the Director, as shown in
Figure
4. For each plate, use three screws.
8
director 2/140 rack mount kit installation instructions