HP StorageWorks XP10000 - Disk Array Manuel de configuration - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 40 pages. Cache lun xp
Également pour HP StorageWorks XP10000 - Disk Array : Note de mise à jour (13 pages), Manuel de l'administrateur (50 pages), Manuel de configuration (42 pages), Manuel de configuration (40 pages), Manuel de configuration (36 pages), Manuel de configuration (36 pages), Manuel de configuration (30 pages), Manuel de configuration (36 pages), Note de mise à jour (5 pages), Manuel de configuration du système (49 pages), Manuel de configuration du système (43 pages), Manuel de configuration du système (42 pages), Manuel de configuration du système (35 pages), Manuel de configuration (46 pages), Manuel de configuration (46 pages), Manuel de configuration (40 pages), Manuel de configuration (44 pages), Manuel de configuration (38 pages), Manuel de configuration (34 pages), Manuel de configuration (30 pages), Manuel de configuration (30 pages), Manuel de configuration (42 pages), Manuel de l'utilisateur (30 pages)

Imprimer la page
HP StorageWorks XP10000 - Disk Array Manuel de configuration
2.
Select p to display the present partitions.
3.
Select n to make a new partition. You can make up to four primary partitions or you can make
one extended partition. The extended partition can be divided into a maximum of 11 logical
partitions, which can be assigned partition numbers from 5 to 15.
4.
Select w to write the partition information to disk and complete the fdisk command.
5.
Other commands that you might want to use include:
d to remove partitions
q to stop a change
6.
Repeat the above steps for each device.

Creating the file systems

The supported file system for Linux is ext2.

Creating file systems with ext2

1.
Enter mkfs
Example
# mkfs
2.
Repeat step 1 for each device on the disk array.
18
Installing and configuring Linux for the XP disk array
t ext2 /dev/device_name.
t ext2 /dev/sdd