HP StorageWorks XP10000 - Disk Array Configuratiehandleiding - Pagina 18

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 40 pagina's. Cache lun xp
Ook voor HP StorageWorks XP10000 - Disk Array: Release Release (13 pagina's), Handleiding voor beheerders (50 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (36 pagina's), Release Release (5 pagina's), Handleiding systeemconfiguratie (49 pagina's), Handleiding systeemconfiguratie (43 pagina's), Handleiding systeemconfiguratie (42 pagina's), Handleiding systeemconfiguratie (35 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (38 pagina's), Configuratiehandleiding (34 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (42 pagina's), Gebruikershandleiding (30 pagina's)

Select p to display the present partitions.

Select n to make a new partition. You can make up to four primary partitions or you can make

one extended partition. The extended partition can be divided into a maximum of 11 logical

partitions, which can be assigned partition numbers from 5 to 15.

Select w to write the partition information to disk and complete the fdisk command.

Other commands that you might want to use include:

d to remove partitions

q to stop a change

Repeat the above steps for each device.

Creating the file systems

The supported file system for Linux is ext2.

Enter mkfs

Example

# mkfs

Repeat step 1 for each device on the disk array.

Installing and configuring Linux for the XP disk array

t ext2 /dev/device_name.

t ext2 /dev/sdd