Aquatel D110-S Manuel d'instruction - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Aquatel D110-S. Aquatel D110-S 12 pages. Wireless level monitor
Imprimer la page
setting up display unit
9
I nsert batteries into the
Display Unit. The display
will turn on showing the
startup message and then
the standard information
screen shown overleaf.
note: display unit can
alternatively be powered by the
6V dc power pack, part no.
aQpp6 supplied with your d110
system.
if the display unit is not connected to a tank unit or is out of range, you will get the
message "disconnected" on the screen when you have selected that tank. if you need to re-
pair a tank unit, see
you can pair up to 6 tank units to the one d110 display unit. paired tank units are shown
along the top and given a number from 1,2,3,4,5 or 6. you can also select a fluid name for
each to help identify which tank/cistern you are monitoring. see
Display
.
11
– 6 –
Power Pack 6 Volts DC
300mA or higher
Center pin positive
Insert 4 x AA batteries
in base of unit
Signal strength between units
Tank number selected
(Up to 6 tanks max)
Current time
Tank Unit icon, temperature
.
11
Up Button
Menu Button
Select option.
Down Button
Silence alarm
Water