Aquatel D110-S Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Aquatel D110-S. Aquatel D110-S 12 pages. Wireless level monitor

Imprimer la page

Set Depth. For the D110 to determine the correct fluid levels, the depth of the

tank/cistern from

Menu", to access this menu see

Setting the Air Gap. Go to the

"Tank Unit Setup Menu" (refer to

once you enter this menu scroll

through to the "Air Gap" and

then using the arrow up and arrow

down buttons, select the required

air gap.

*Air gap: Distance between where

tank unit is installed and the maximum

fluid level)

100mm (min) – 1000mm (max)

3.93" (min) – 39.37" (max)

ensuring maximum range

T he D110 uses short range radio communications and works better with less

obstructions between Aquatel units. The more obstructions there are, the lower

the transmission range you will be able to achieve. For example, locating the

Display Unit by a window will give stronger communication signals than if it is

behind a concrete or metal wall. If you need to increase your signal strength

further, simply purchase Aquatel's AQC24 Antenna Extension Kit and remotely

mount the antennas on external walls as high as possible. Booster Yagi Antennas

are also available AQ920, these will increase the working range to a distance of 1

mile.

must be input on the Display Unit via the "Tank unit Setup

) ,

– 5 –

Air Gap*