Aquatel D110-S Kullanım Kılavuzu - Sayfa 6
Monitör Aquatel D110-S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aquatel D110-S 12 sayfaları. Wireless level monitor
6
Set Depth. For the D110 to determine the correct fluid levels, the depth of the
tank/cistern from
Menu", to access this menu see
7
Setting the Air Gap. Go to the
"Tank Unit Setup Menu" (refer to
once you enter this menu scroll
through to the "Air Gap" and
then using the arrow up and arrow
down buttons, select the required
air gap.
*Air gap: Distance between where
tank unit is installed and the maximum
fluid level)
100mm (min) – 1000mm (max)
3.93" (min) – 39.37" (max)
ensuring maximum range
8
T he D110 uses short range radio communications and works better with less
obstructions between Aquatel units. The more obstructions there are, the lower
the transmission range you will be able to achieve. For example, locating the
Display Unit by a window will give stronger communication signals than if it is
behind a concrete or metal wall. If you need to increase your signal strength
further, simply purchase Aquatel's AQC24 Antenna Extension Kit and remotely
mount the antennas on external walls as high as possible. Booster Yagi Antennas
are also available AQ920, these will increase the working range to a distance of 1
mile.
must be input on the Display Unit via the "Tank unit Setup
3
.
10
) ,
10
– 5 –
Air Gap*