Panasonic RX-C52 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic RX-C52. Panasonic RX-C52 21 pages. Portable stereo component system

Imprimer la page

RADIO

1) Press the Power Switch to "m= ON".

The

Power/Battery Check Indicator will light.

2). Press the RADIO

Button (FUNCTION).

7) The radio can be turned off by setting the Power Switch

to 'MH OFF/SLEEP".

Notes:

eTo receive FM stereo broadcasts, set the FM Mode

Selector to 'EE STEREO". The FM Stereo Indicator

will light during stereo broadcasts.

elf FM stereo reception is poor (excessive noise, FM

Stereo Indicator flickers), set the FM Mode Selector

elf the tape operation buttons are pressed while you

are listening to a radio broadcast, the sound and

Line Output may be temporarily interrupted.

m@ FM AFC

This set uses an Automatic Frequency Control (AFC) circuit

which locks the tuned station during FM and FM stereo

reception. This assures additional stability without frequen-

cy drift.

MLevel Meter

@ Antennas

FM:

@Pull out the Telescopic Antenna and adjust its length and

angle for optimum reception.

On,

AM:

eThe

sensitive

ferrite core

antenna

inside the set will

provide excellent AM reception in most areas. For opti-

mum reception, turn the set in the direction which gives the

best results, since the ferrite core antenna is directional.

3000 twin lead

;

Matching

transformer

(300Q—75Q)

Shield wire

75Q coaxial cable

Inner conductor

Note:

If the antenna is connected with 75Q coaxial cable instead

of 3009 twin lead, the matching transformer is not required.

2 Paes

Push and

Insert wire