DIAQUIP QFS-1200 Manuel de l'opérateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} DIAQUIP QFS-1200. DIAQUIP QFS-1200 12 pages. Electric floor saw

Imprimer la page
2. CUTTING OPERATION
2.2.2) Motorized depth adjusting
Electric
Switch
Up
Down
Speed
The desired cutting depth is adjusted by a motorized threaded spindle unit. In order to rise or
lower the saw blade you use the electric switch on the left side of the machine panel. Turning
the switch form his zero position in two steps to the left side and hold
the switch in this position, the saw blade is going up; out of the cut. Turning the switch from
zero position to the right, the saw blade is going down, in to the cut. The speed of the motorized
depth adjusting unit can bee regulated be the potentiometer 01.
If the cutting depth is achieved, turn the speed regulated by potentiometer 01 to stop and then
turn the switch back to the zero position. Please note the potentiometer 01 is now active for the
cutting speed of the machine. (see also point 2.3.)
A adjustable depth display on the left side on the machine shows the respective cutting depth.
According to the saw blade diameter lower the saw blade by the motorized depth adjusting unit
so that the saw blade touching the ground. Now putting the cutting the indicator on the scale on
zero.
WWW.DIAQUIP.CO.UK
/07