DIAQUIP QFS-1200 Panduan Operator - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Operator untuk Melihat DIAQUIP QFS-1200. DIAQUIP QFS-1200 12 halaman. Electric floor saw

2. CUTTING OPERATION

2.2.2) Motorized depth adjusting

Electric

Switch

Down

Speed

The desired cutting depth is adjusted by a motorized threaded spindle unit. In order to rise or

lower the saw blade you use the electric switch on the left side of the machine panel. Turning

the switch form his zero position in two steps to the left side and hold

the switch in this position, the saw blade is going up; out of the cut. Turning the switch from

zero position to the right, the saw blade is going down, in to the cut. The speed of the motorized

depth adjusting unit can bee regulated be the potentiometer 01.

If the cutting depth is achieved, turn the speed regulated by potentiometer 01 to stop and then

turn the switch back to the zero position. Please note the potentiometer 01 is now active for the

cutting speed of the machine. (see also point 2.3.)

A adjustable depth display on the left side on the machine shows the respective cutting depth.

According to the saw blade diameter lower the saw blade by the motorized depth adjusting unit

so that the saw blade touching the ground. Now putting the cutting the indicator on the scale on

zero.

WWW.DIAQUIP.CO.UK

/07