Axis 570 MIO Manuel d'installation rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Axis 570 MIO. Axis 570 MIO 10 pages.

Imprimer la page

UNIX

Please note that you need UNIX root privileges, or administrator

privileges on a Windows NT server for this configuration procedure.

1. Acquire an unused Internet Address from your Network

Administrator and choose a unique name for your AXIS

570/670.

2. Add your AXIS 570/670 IP address and host name to your

system host table by appending the following line to the

/etc/hosts

Example:

192.36.253.96

3. Update your alias name databases (YP/NIS).

4. Perform the following commands to download the Internet

Address and verify correct Internet communication:

AXIS 570 Ethernet Print Server:

arp -s <host name> <node address> temp

ping <host name>

Example for Ethernet:

arp -s salesdept 00:40:8c:10:00:86 temp

ping salesdept

AXIS 670 Token Ring Print Server:

arp -s 802.5 <host name> <node address> temp

ping <host name>

Example for Token Ring:

arp -s 802.5 salesdept 00:02:31:48:00:61 temp

ping salesdept

5. Log in to the AXIS 570/670 and up-load the axinstall script:

Example: (user entries appear in bold)

> ftp salesdept

Name (salesdept:thomas): root

Password: pass

ftp> get axinstall

ftp> bye

6. Execute the script:

sh axinstall↵

The directions displayed on the screen will then guide you

through the installation of LPD, FTP or PROS on your UNIX

system.

The UNIX Configuration is now completed.

Notes:

The Node Address is based upon the serial number of the AXIS

570/670 but may optionally be a Locally Administrated Address.

You may alternatively use the RARP, BOOT or DHCP

command to set the Internet Address; refer to the User's Manual

Section 7.

file:

salesdept

(not visible)

UNIX