Axis 570 MIO Instrukcja szybkiej instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Serwer druku Axis 570 MIO. Axis 570 MIO 10 stron.

Drukuj stronę

UNIX

Please note that you need UNIX root privileges, or administrator

privileges on a Windows NT server for this configuration procedure.

1. Acquire an unused Internet Address from your Network

Administrator and choose a unique name for your AXIS

570/670.

2. Add your AXIS 570/670 IP address and host name to your

system host table by appending the following line to the

/etc/hosts

Example:

192.36.253.96

3. Update your alias name databases (YP/NIS).

4. Perform the following commands to download the Internet

Address and verify correct Internet communication:

AXIS 570 Ethernet Print Server:

arp -s <host name> <node address> temp

ping <host name>

Example for Ethernet:

arp -s salesdept 00:40:8c:10:00:86 temp

ping salesdept

AXIS 670 Token Ring Print Server:

arp -s 802.5 <host name> <node address> temp

ping <host name>

Example for Token Ring:

arp -s 802.5 salesdept 00:02:31:48:00:61 temp

ping salesdept

5. Log in to the AXIS 570/670 and up-load the axinstall script:

Example: (user entries appear in bold)

> ftp salesdept

Name (salesdept:thomas): root

Password: pass

ftp> get axinstall

ftp> bye

6. Execute the script:

sh axinstall↵

The directions displayed on the screen will then guide you

through the installation of LPD, FTP or PROS on your UNIX

system.

The UNIX Configuration is now completed.

Notes:

The Node Address is based upon the serial number of the AXIS

570/670 but may optionally be a Locally Administrated Address.

You may alternatively use the RARP, BOOT or DHCP

command to set the Internet Address; refer to the User's Manual

Section 7.

file:

salesdept

(not visible)

UNIX