Didgeridoo Pulse Jet Engine Manuel d'assemblage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Didgeridoo Pulse Jet Engine. Didgeridoo Pulse Jet Engine 9 pages.

Imprimer la page

6/9

5 5

INSTRUCTIONS

Grab the Diverter.

Fully screw the Receiver into the Diverter.

3 3

Partially screw the Locking Nut onto the

Receiver, approximately half way.

2 2

NOTE

Use the Wrench to ensure a tight fit.

1 1

Screw the Fuel Controller into the

Receiver until you feel resistance.

4 4

NOTE

Over tightening the Locking Nut may

damage the threads.

Finish screwing the Locking Nut onto the

Receiver until you feel resistance

Only tighten enough so that the Fuel

Controller is no longer able to move.

NOTE

Don't tighten the Fuel Controller too much

as this can damage the tip and allow fuel to

leak out.

The Fuel Controller is now assembled!

It should look like the image above.

Fuel Controller

Locking Nut

Receiver

Diverter

M10 Wrench

Fuel Injector

Assembly

PARTS LIST

TOOL LIST