Didgeridoo Pulse Jet Engine Manuel d'assemblage - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Didgeridoo Pulse Jet Engine. Didgeridoo Pulse Jet Engine 9 pages.

Imprimer la page

7/9

3 3

2 2

5 5

INSTRUCTIONS

4 4

Grab the Rear Housing so that the front is

facing up.

Place the Air Controller on top of the Rear

Housing with the tip pointing up.

NOTE

The Plate should be the only part touching

the Rear Housing.

1 1

With the Air Controller in place screw the

Front Housing on top of the Front Housing.

Screw the Fuel Injector into the hole on

the Front Housing.

NOTE

Use the Wrench to ensure a tight fit.

Screw the Spark Plug into the hole on the

Rear Housing.

The Housing is now assembled!

NOTE

If you are having issues with

misfiring try placing some wax,

putty or plumbers tape around the

edge of the Plate where it mates

with the Front Housing to insure an

airtight seal.

Front Housing

Air Controller

Rear Housing

Fuel Injector

Sparkplug

M10 Wrench

Housing

Assembly

PARTS LIST

TOOL LIST