Alpha Professional Tools WBCKIT Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Alpha Professional Tools WBCKIT. Alpha Professional Tools WBCKIT 8 pages. Wet blade cutting kit

Imprimer la page

CREATING THREAD HOLES FOR THE PROTECTIVE GUARD

Hole Size:
5mm or #8 Drill Bit

ASSEMBLY OF WBCKIT GUARD

STEP 1
1.
Thread plastic cable tie through
holes in the guard. (If using another
grinder the safety guard must be
altered to accomodate cable ties
as shown above).
STEP 3
3.
Repeat steps 1 and 2 to com-
pletely secure the coolant tube to
the guard.
WBCKIT Guard Assembly
4
Illustration of
Protection Guard
10mm (3/8")
25mm (1")
STEP 2
2.
Place coolant tube between holes
on Guard and tighten in place with
plastic tie.
STEP 4
4.
Trim plastic ties with pliers as shown
above.