Alpha Professional Tools WBCKIT 사용 설명서 - 페이지 4
{카테고리_이름} Alpha Professional Tools WBCKIT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha Professional Tools WBCKIT 8 페이지. Wet blade cutting kit
페이지 인쇄CREATING THREAD HOLES FOR THE PROTECTIVE GUARD
Hole Size:
5mm or #8 Drill Bit
ASSEMBLY OF WBCKIT GUARD
STEP 1
1.
Thread plastic cable tie through
holes in the guard. (If using another
grinder the safety guard must be
altered to accomodate cable ties
as shown above).
STEP 3
3.
Repeat steps 1 and 2 to com-
pletely secure the coolant tube to
the guard.
WBCKIT Guard Assembly
4
Illustration of
Protection Guard
10mm (3/8")
25mm (1")
STEP 2
2.
Place coolant tube between holes
on Guard and tighten in place with
plastic tie.
STEP 4
4.
Trim plastic ties with pliers as shown
above.