Alpha Professional Tools HEPADV10 Manuel Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel Manuel pour {nom_de_la_catégorie} Alpha Professional Tools HEPADV10. Alpha Professional Tools HEPADV10 16 pages. Hepa dry vacuum

AboUT THE MACHINE

To CoNNECT THE HosE

Insert the hose end into the tank inlet until it clicks. To remove the hose, press the
button on top of the hose inlet, and remove hose.

AssEMbly INsTRUCTIoNs

Insert casters into sockets on bottom of canister. Push casters until seated. Attach
hose to coupling on front of can.

MAINTENANCE

This vacuum cleaner contains no user serviceable parts. If repair is needed, please
take the vacuum cleaner to an authorized Alpha Professional Tools
ter.

foR DRy PICKUP

Install paper bag on inlet inside of tank. Insert the HEPA filter assembly in the top
of the tank. Install motor head.

foR UsE WITH PoWER Tools

for use with power tools drawing 3.9 amps or less. Turn the vacuum switch off, and
connect the power tool drawing 3.9 amps or less to the outlet in the motor head.
When the power tool is started, the vacuum cleaner will start. The vacuum cleaner
will continue to run for a few seconds after the power tool is turned off, in order to
clear dust from the hose. When no power tool is attached, the vacuum cleaner may
also be turned on and off using the switch on the power head.

sToRAGE

Coil cord in a large loop and insert under handle for storage. Grasp the plug when
unplugging from wall. Do not pull the cord.
Do not use this vacuum to pick up hazardous materials without HEPA filter being
installed.
Never lubricate the vacuum cleaner motor. The motor bearings are permanently
sealed. This vacuum is intended for indoor or outdoor use and for wet pickup, but
it is not intended to be exposed to rain.
CAUTIoN!
CAUTIoN!
service cen-
®
9 9