AXITEC AXIhycon 5H Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AXITEC AXIhycon 5H. AXITEC AXIhycon 5H 8 pages.

CONNECTING THE SMART METER

Install the smart meter for communication.

CAUTION:

Ensure that the AC cable is completely disconnected from the power source

before connecting the smart meter, EMS, and CT clamps.

NOTE:

Please ensure that the alignment of the current trans-

former (CT clamps) is correct, as otherwise the system

will not function properly.

NOTE:

The pin configuration of the meter port (at the inverter)

follows the EIA/TIA 568B standard.

RS485A on Pin 1: Orange/White

RS485B on Pin 2: Orange

NOTE:

The pin configuration of the Smart Meter for RS485 is as follows:

RS485A is connected to pin 14.

RS485B is connected to pin 13.

AXIhycon-EN231024

RS485B

RS485A