Olympus BX2 SERIES Manuel d'entretien - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Olympus BX2 SERIES. Olympus BX2 SERIES 29 pages. Olympus microscope bx2
Également pour Olympus BX2 SERIES : Information (6 pages)

Imprimer la page

BX2 MAINTENANCE MANUAL

3. Grease replacement for fine focus adjustment knob ass'y

If the adjustment knob is not turned smoothly, replace grease on the shaft and gear of fine

adjustment ass'y in the following procedure.

(In case where the coarse adjustment knob ass'y is not turned evenly, please contact your

Authorized Olympus dealer because it is necessary to disassemble the coarse adjustment

knob ass'y and/or guide unit.)

1) Remove the screw (AB4X10SA *1) and take off the knob.

2) Hold the fine focus adjustment knob (left) and turn the fine focus adjustment knob (right)

to remove them. (At this time, the fine focus adjustment knob ass'y (right ) is removed

as an assembly of shaft, gear and fine focus adjustment knob. )

3) Remove grease(OT2008) on the shaft by cleaning solution and replace it.

For the gear, apply grease(OT2012) on it.

4) Assemble the components in reverse order of disassembly.

Fine focus adjustment knob (Left)

(A004)

(A005)

Cap

REPAIR PROCEDURE

(A002)

Apply grease (OT2008)

to the shaft.

Adhesive(OT1087) has been

applied to the screw thread

of shaft on the right side.

- 17 -

Fine focus adjustment knob ass'y (right)

Apply grease (OT2012) to

the gear.

(A001)

Fine focus adjustment knob

(A003)

Knob