Olympus BX2 SERIES Onderhoudshandleiding - Pagina 20
Blader online of download pdf Onderhoudshandleiding voor {categorie_naam} Olympus BX2 SERIES. Olympus BX2 SERIES 29 pagina's. Olympus microscope bx2
Ook voor Olympus BX2 SERIES: Informatie (6 pagina's)
Pagina afdrukken
BX2 MAINTENANCE MANUAL
3. Grease replacement for fine focus adjustment knob ass'y
If the adjustment knob is not turned smoothly, replace grease on the shaft and gear of fine
adjustment ass'y in the following procedure.
(In case where the coarse adjustment knob ass'y is not turned evenly, please contact your
Authorized Olympus dealer because it is necessary to disassemble the coarse adjustment
knob ass'y and/or guide unit.)
1) Remove the screw (AB4X10SA *1) and take off the knob.
2) Hold the fine focus adjustment knob (left) and turn the fine focus adjustment knob (right)
to remove them. (At this time, the fine focus adjustment knob ass'y (right ) is removed
as an assembly of shaft, gear and fine focus adjustment knob. )
3) Remove grease(OT2008) on the shaft by cleaning solution and replace it.
For the gear, apply grease(OT2012) on it.
4) Assemble the components in reverse order of disassembly.
Fine focus adjustment knob (Left)
(A004)
(A005)
Cap
REPAIR PROCEDURE
(A002)
Apply grease (OT2008)
to the shaft.
Adhesive(OT1087) has been
applied to the screw thread
of shaft on the right side.
- 17 -
Fine focus adjustment knob ass'y (right)
Apply grease (OT2012) to
the gear.
(A001)
Fine focus adjustment knob
(A003)
Knob
*1