Olympus BX46 Manuel d'instructions - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus BX46. Olympus BX46 44 pages. Clinical microscope
Imprimer la page
5-4 Observation Tube
2
1
Fig. 24
Fig. 25
1
Adjusting the Diopter
1. Set the diopter adjustment rings on both sides to scale "0".
2. Engage a high-power objective (40X or so) in the light path, look into
the right eyepiece with your right eye, and rotate the coarse and fine
adjustment knobs to bring the specimen into focus.
} Do not use an oil-immersion objective.
3. Engage a low-power objective (10X or so) in the light path, rotate the right
diopter adjustment ring @ to bring the specimen into focus. Do not touch
the coarse and fine adjustment knobs during the focusing.
4. Looking into the left eyepiece with your left eye, rotate the left diopter
adjustment ring 2 to bring the specimen in focus.
} The above procedure adjusts the diopter with reference to the right eye,
but it is also possible to adjust with reference to the left eye. In this case,
read the above procedure by inverting "right" and "left."
} If an eyepiece equipped with a diopter adjustment ring is inserted into
the side equipped with another diopter adjustment ring of the observation
tube, perform the above procedure without moving the diopter adjustment
ring of the observation tube from the "0" position.
2
Using the Eye Shades
When Wearing Eyeglasses
Use with the eye shades in the normal, folded-down position. This will
prevent the eyeglasses from being scratched.
When Not Wearing Eyeglasses
Extend the folded eye shades in the direction of the arrow to prevent
extraneous light from entering between the eyepieces and eyes.
BX46
(Fig. 24)
(Fig. 25)
19