Olympus IX81-ZDC2 Manuel d'instructions - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus IX81-ZDC2. Olympus IX81-ZDC2 16 pages. Focus drift compensating microscope

Imprimer la page

Fig. 3

Placing the Specimen

Put the specimen in the glass-bottom dish (with cover glass thickness

of 0.16 to 0.18 mm) and place the dish on the center of the stage.

} If the dish is prone to slide on the stage, attach the stage clips (IX-SCL)

1 or use the provided weight.

Setting the Focus Drift Compensation Function

1. Run the "Application Software for PC."

2. Set up the AF (autofocusing) functions.

The following parameters should be set to start AF.

In one-shot mode

· Offset : Setup of the amount of compensation between the cover glass

top surface and target position.

· AF zone : AF search zone (AF center, width and range)

In continuous focus mode

Confirm that the cover glass top surface is detected in the one-shot

mode before switching to the continuous focus mode.

} For details, refer to the instruction manual and Help of the application.

When using the MetaMorph application software, install IX2-

CAUTION

BSW Ver. 1.7 (in the CD provided with this product) in your PC

in advance.

IX81-ZDC2

(Fig. 3)