Olympus PT-022 Manuel d'instruction - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Olympus PT-022. Olympus PT-022 43 pages. Underwater case

Check the loading status.

Always perform the following final checks before sealing the Case.

Has the digital camera been loaded so that the zoom lever

operates properly?

Has the silica gel been inserted all the way at the specified position?

Has the O-ring at the Case opening part been installed properly?

Are the O-ring and the O-ring contact surface on the front lid free of

dirt and other foreign matter?

When the rear lid is closed

(quietly, so that the O-ring will

not come out of the groove),

the buckles are engaged with

the edge of the rear lid, and the

buckle lock levers are pushed

down in arrow direction, the

Case will be sealed airtight.

CAUTION

: • Seal the Case by turning both buckle lock levers

down in arrow direction. When one of the buckles is

left open, the Case will not be sealed and water

leakage will be caused.

Install the special balance weight to

the tripod mounting thread at the

bottom of the case. Install the balance

weight securely by tightening the

accessory screw of the balance

weight.

E-22