Olympus PT-022 Manuel d'instruction - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Olympus PT-022. Olympus PT-022 43 pages. Underwater case

Imprimer la page

Mounting and Removing the Lens Cap

Fit the lens cap onto the lens
ring as shown in the figure. Be
sure to remove the lens cap
before shooting.

Perform the final checks.

Visual Inspection

After sealing the Case, check the sealing part of front and rear lid
visually to confirm that the O-ring is not twisted or out of the groove
and that no foreign matter has been caught.
CAUTION
: • Hairs, fibers, and other narrow items are not very apparent,
but they may cause entry of water, so that special attention
is required.

Set the power to 'ON'.

Move the power switch and confirm that the camera power can be
switched ON and OFF.

Try to move the mode dial.

After sealing, turn the mode dial knob and confirm that the mode
dial of the camera is switched.
CAUTION
:
• After loading the camera into the Case, confirm that the
mode dial moves. If it does not move, there is the
possibility that oil or fat has been attached to the mode
dial. Please wipe it clean.
E-24