Olympus MX61A Manuel - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Olympus MX61A. Olympus MX61A 48 pages. Motorized 300 mm compatible semiconductor/fpd inspection microscope

BX-UCB
²
³
Fig. 26
MX-OPU61A
³
Fig. 27
|
ƒ
Fig. 28
Fig. 29
15
Connecting the Power Cord
Cables and cords are vulnerable to bend or twist. Do not apply ex-
cessive force to them.
Make sure that the main switch @ is set to "
necting cords and cables.
Always use the power cord provided by Olympus. If no power cord
is provided, please select the power cord by referring to the section
"PROPER SELECTION OF THE POWER SUPPLY CORD" at the end of
this manual. If the proper power cord is not used, Olympus can no
longer warrant the electrical safety performance of the equipment.
1. Connect the power cord plug ² to the AC receptacle ³.
Connect the provided power cord correctly and ensure that the
grounding terminal of the power supply and that of the 3-conductor
wall outlet are properly connected. If the equipment is not grounded/
earthed, Olympus can no longer warrant the electrical safety perfor-
mance of the equipment.
2. Connect the power cord plug | to a 3-conductor power outlet ƒ.
²
16
Bundling the Cables
}The cables can be bundled using the provided binding part.
1. Wrap the binding part around the bundled cables and fix them by en-
gaging the hook.
MX61A
(Figs. 26 to 28)
" (OFF) before con-
(Fig. 29)
24