Olympus MX61A Посібник - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник для Лабораторне обладнання Olympus MX61A. Olympus MX61A 48 сторінок. Motorized 300 mm compatible semiconductor/fpd inspection microscope

Друкувати сторінку

BX-UCB

Fig. 26

MX-OPU61A

Fig. 27

Fig. 28

Fig. 29

Connecting the Power Cord

Cables and cords are vulnerable to bend or twist. Do not apply ex-

cessive force to them.

Make sure that the main switch @ is set to "

necting cords and cables.

Always use the power cord provided by Olympus. If no power cord

is provided, please select the power cord by referring to the section

"PROPER SELECTION OF THE POWER SUPPLY CORD" at the end of

this manual. If the proper power cord is not used, Olympus can no

longer warrant the electrical safety performance of the equipment.

1. Connect the power cord plug ² to the AC receptacle ³.

Connect the provided power cord correctly and ensure that the

grounding terminal of the power supply and that of the 3-conductor

wall outlet are properly connected. If the equipment is not grounded/

earthed, Olympus can no longer warrant the electrical safety perfor-

mance of the equipment.

2. Connect the power cord plug | to a 3-conductor power outlet ƒ.

Bundling the Cables

}The cables can be bundled using the provided binding part.

1. Wrap the binding part around the bundled cables and fix them by en-

gaging the hook.

MX61A

(Figs. 26 to 28)

" (OFF) before con-

(Fig. 29)