Axminster AW1416VS Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Axminster AW1416VS. Axminster AW1416VS 20 pages. Woodturning lathe
Imprimer la page
The indexing facility is useful for fluted columns, clock faces and accurate hole positioning. The
indexing pulley has 24 positions (15˚) indexing using the supplied index pin (F).
Headstock
wheel
Fig 10
Open the access panel, turn the headstock wheel until the pre-drilled hole in the headstock lines up
with one of the 24 pre-drilled hole positions on the index pulley. (See figs 10,11 & 12)
Pre-drilled hole
Fig 12
Locate the 24 index pin (F) and slide the pin into the pre-drilled holes to lock the pulley to the desired
position.
Fig 14
The picture above shows the index
number is set to position 01.
Note: The index pin (F) has a magnetic base, enabling the pin to
be attached to the lathe to prevent it from being lost.
Access panel
FREEPHONE 0800 371822
Indexing Operation...
1-24 index
positions
F
The picture above shows the index
number is set to position 23.
W
A X M I N S T E R
W H I T E
Fig 11
Fig 13
Fig 15
10