- ページ 11

旋盤 Axminster AW1416VSのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Axminster AW1416VS 20 ページ。 Woodturning lathe

The indexing facility is useful for fluted columns, clock faces and accurate hole positioning. The

indexing pulley has 24 positions (15˚) indexing using the supplied index pin (F).

Headstock

wheel

Fig 10

Open the access panel, turn the headstock wheel until the pre-drilled hole in the headstock lines up

with one of the 24 pre-drilled hole positions on the index pulley. (See figs 10,11 & 12)

Pre-drilled hole

Fig 12

Locate the 24 index pin (F) and slide the pin into the pre-drilled holes to lock the pulley to the desired

position.

Fig 14

The picture above shows the index

number is set to position 01.

Note: The index pin (F) has a magnetic base, enabling the pin to

be attached to the lathe to prevent it from being lost.

Access panel

FREEPHONE 0800 371822

Indexing Operation...

1-24 index

positions

The picture above shows the index

number is set to position 23.

A X M I N S T E R

W H I T E

Fig 11

Fig 13

Fig 15