Axminster Hobby Series Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Axminster Hobby Series. Axminster Hobby Series 12 pages. Scroll saw
Également pour Axminster Hobby Series : Manuel de l'utilisateur (13 pages), Manuel (20 pages), Manuel (20 pages)

Imprimer la page
Axminster Hobby Series Manuel
A pair of blade holders allowing the use of
plain blades (see fig 4)
A. Remove the standard blade as described above, Note:
Easy access to the lower housing is provided, when the
side cover is removed.
B. Loosen the two hex screws either side of the holder &
slide the blade up into the centre hole & carefully
re-tighten both hex screws. Note: DO NOT
OVERTIGHTEN, as the blade will break. (see fig 5) Repeat
for the other holder.
C. Lower one end of the blade assembly through the
access hole in the table, ensure the blade teeth are
pointing DOWNWARDS & FORWARDS. Slot the lower
blade holder into the lower housing, making sure the
holders ridge engages into the housing recess. (see fig 6)
Hex screw
Fig. 4
Fig. 5
Blade
4mm
hex key
Clamping the blade
into the holder
Ridge
Hex screw
Blade holder
Centre hole
Housing recess
Lower housing beneath
the work table
Fig. 6