Axminster Hobby Series 매뉴얼 - 페이지 6

{카테고리_이름} Axminster Hobby Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster Hobby Series 12 페이지. Scroll saw
Axminster Hobby Series에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지), 매뉴얼 (20 페이지), 매뉴얼 (20 페이지)

페이지 인쇄

A pair of blade holders allowing the use of

plain blades (see fig 4)

A. Remove the standard blade as described above, Note:

Easy access to the lower housing is provided, when the

side cover is removed.

B. Loosen the two hex screws either side of the holder &

slide the blade up into the centre hole & carefully

re-tighten both hex screws. Note: DO NOT

OVERTIGHTEN, as the blade will break. (see fig 5) Repeat

for the other holder.

C. Lower one end of the blade assembly through the

access hole in the table, ensure the blade teeth are

pointing DOWNWARDS & FORWARDS. Slot the lower

blade holder into the lower housing, making sure the

holders ridge engages into the housing recess. (see fig 6)

Hex screw

Fig. 4

Fig. 5

Blade

4mm

hex key

Clamping the blade

into the holder

Ridge

Hex screw

Blade holder

Centre hole

Housing recess

Lower housing beneath

the work table

Fig. 6