Axminster AW200WSG Manuel d'instructions original - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} Axminster AW200WSG. Axminster AW200WSG 17 pages. Wide stone bench grinder
Imprimer la page
CONNECT THE GRINDER
TO THE MAINS SUPPLY.
Switch on the grinder, wait until it reaches full speed and
leave the machine running for at least one minute before
carrying out any work. Apply a work piece and check that
the spark guard is correctly positioned and that the tool
rest is securely fixed. Switch off and wait until the grinder
comes to a complete stop.
DISCONNECT THE GRINDER
FROM THE MAINS SUPPLY.
After a period of time uneven wear on the stones including,
crests dips or rounded edges will appear. They will need to
be dressed out using a suitable wheel dressing stick. See
our website and in our catalogue for details, see fig 10-11.
Fig 10-11
Code 410074
Wheel Dressing Stick for coarse carborundum
and dressing worn or unbalanced wheels.
Code 410057
Diamond Dressing Block useful for dressing across the
width of the grinding wheels or to produce flatter surfaces
than single point dressers.
DRESSING THE STONE/CHANGING THE LIGHT BULB
CONNECT THE GRINDER
TO THE MAINS SUPPLY.
Switch the grinder on and allow it to run for at least one
minute. Rest the dressing tool on the tool rest and advance
it to the stone until it touches the maximum diameter;
gently move the dresser back and forth across the face of
the stone until all irregularities have been removed and
the edges of the stone are nice and sharp, see fig 12.
Changing the Light Bulb
The flexible light has a 12V 0.36W screw threaded LED bulb.
Unscrew the blown bulb and replace.
11
Fig 12
Step 13-14