Axminster AW200WSG Manual Petunjuk Asli - Halaman 11

Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Penggiling Axminster AW200WSG. Axminster AW200WSG 17 halaman. Wide stone bench grinder

Halaman Cetak

CONNECT THE GRINDER

TO THE MAINS SUPPLY.

Switch on the grinder, wait until it reaches full speed and

leave the machine running for at least one minute before

carrying out any work. Apply a work piece and check that

the spark guard is correctly positioned and that the tool

rest is securely fixed. Switch off and wait until the grinder

comes to a complete stop.

DISCONNECT THE GRINDER

FROM THE MAINS SUPPLY.

After a period of time uneven wear on the stones including,

crests dips or rounded edges will appear. They will need to

be dressed out using a suitable wheel dressing stick. See

our website and in our catalogue for details, see fig 10-11.

Fig 10-11

Code 410074

Wheel Dressing Stick for coarse carborundum

and dressing worn or unbalanced wheels.

Code 410057

Diamond Dressing Block useful for dressing across the

width of the grinding wheels or to produce flatter surfaces

than single point dressers.

DRESSING THE STONE/CHANGING THE LIGHT BULB

CONNECT THE GRINDER

TO THE MAINS SUPPLY.

Switch the grinder on and allow it to run for at least one

minute. Rest the dressing tool on the tool rest and advance

it to the stone until it touches the maximum diameter;

gently move the dresser back and forth across the face of

the stone until all irregularities have been removed and

the edges of the stone are nice and sharp, see fig 12.

Changing the Light Bulb

The flexible light has a 12V 0.36W screw threaded LED bulb.

Unscrew the blown bulb and replace.

Fig 12

Step 13-14