Axminster Trade 505092 Manuel de démarrage rapide - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Axminster Trade 505092. Axminster Trade 505092 17 pages. 300mm disc sanders

Imprimer la page

Changing the Sanding Disc

DISCONNECT THE SANDER FROM

THE MAINS SUPPLY BEFORE

CONTINUING!

Fig 10

Step 1 Remove the two table clamping handles (see fig 10).

Fig 11

Step 2 Remove both Phillips screws on either side of the

table and place safely aside (see fig 11).

Fig 12

Step 3 Lift the table assembly away and place to one side

(see fig 12).

Step 4 Locate the supplied spanner (C) and using the 10mm

end remove the two nuts on either side of the extraction

housing (see fig 13)

Step 5 Lower the extraction housing (see fig 14).

Step 6 Grip the edge of the adhesive disc and peel away

from the plate; turning the plate as required to free the

entire disc (see fig 15). Clean the surface of the disc with a

de-greasing cleaner. Allow to dry off and wipe over with a

Fig 13

Fig 14

Fig 15