Axminster Trade 505092 Посібник із швидкого старту - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Шліфувальна машина Axminster Trade 505092. Axminster Trade 505092 17 сторінок. 300mm disc sanders

Changing the Sanding Disc

DISCONNECT THE SANDER FROM
THE MAINS SUPPLY BEFORE
CONTINUING!
Fig 10
Step 1 Remove the two table clamping handles (see fig 10).
Fig 11
Step 2 Remove both Phillips screws on either side of the
table and place safely aside (see fig 11).
Fig 12
Step 3 Lift the table assembly away and place to one side
(see fig 12).
Step 4 Locate the supplied spanner (C) and using the 10mm
end remove the two nuts on either side of the extraction
housing (see fig 13)
Step 5 Lower the extraction housing (see fig 14).
Step 6 Grip the edge of the adhesive disc and peel away
from the plate; turning the plate as required to free the
entire disc (see fig 15). Clean the surface of the disc with a
de-greasing cleaner. Allow to dry off and wipe over with a
10
Fig 13
Fig 14
Fig 15