AXTON A200 Manuel d'installation et d'utilisation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AXTON A200. AXTON A200 17 pages. 1-/2-/4-/5-channel power amplifiers

Imprimer la page

Thank you for purchasing this AXTON amplifier!

To maximize the performance of this amplifier and your complete car audio system install, we

recommend that you acquaint yourself thoroughly with all technical features and controlling

options of this AXTON amplifier. Please read this manual carefully, before attempting the

installation.

If, after reading this manual, you still have questions regarding functions or the installation of

the amplifier, we recommend that you consult your dealer.

1. CONNECTIONS + CONTROLS A100 - PAGE I

SIGNAL INPUTS R / L

Low-level stereo RCA signal or high-level speaker signal input terminal for connection to

head-unit.

AUTO-TURN-ON MODE

Slide switch to select the auto-turn-on function: REM by remote wire, VOX to switch on

by music signal or DC by DC offset signal of the head units integrated amplifier.

INPUT GAIN CONTROL

Input gain potentiometer for the subwoofer output channel, to match the output voltage

of the head unit to the amplifier's input.

SUBSONIC HIGHPASS FREQUENCY CONTROL

Control potentiometer to adjust the subsonic highpass filtering frequency point of the

subwoofer output channel.

BASS BOOST 0dB to + 18dB

Turn clockwise to get up to + 18dB bass boost or counterclockwise for no boost with a

45 Hz center frequency of the amplified output signal.

LOWPASS FREQUENCY CONTROL

Control potentiometer to adjust the lowpass filtering frequency point of the subwoofer

output channel.

BASS LEVEL REMOTE CONTROL INPUT 1/2-CH

Input terminal to connect the external bass level remote to the amplifier.

POWER LED

LED to show the operating status of the amplifier by blue/red illumination. Blue is

normal working state, red is protect mode of amplifier.

INPUT MODE SELECTION

Switch to select the proper input sensitivity range: RCA signal input = Low. Speaker

signal input = Hi.

10 SPEAKER OUTPUT TERMINAL

Output terminal to connect the speakers to the amplifier.

11 "+12 V" POWER INPUT TERMINAL

Terminal to connect the amplifier to the positive +12V pole of the car battery.

12 "REM" INPUT TERMINAL

Terminal to connect the amplifier to the automatic (remote) turn-on / turn-off lead of the

head unit. By using the REM terminal, you need to switch the Auto-turn-On mode

the "REM" position.

– 2 –

1. CONNECTIONS + CONTROLS A100 - PAGE II

13 "GND" POWER INPUT TERMINAL

Terminal to connect the amplifier to the chassis ground or negative pole of the car

battery.

2 3

105.0 mm

bn bo

– 3 –