Circe Cycles Morpheus Manuel d'assemblage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Circe Cycles Morpheus. Circe Cycles Morpheus 8 pages.
Également pour Circe Cycles Morpheus : Manuel du propriétaire (10 pages)

Imprimer la page

INTRODUCTION

This manual is intended for those who have bought

their Morpheus directly from Circe Cycles and

have received their tandem packed in a box.

This manual is to help you unpack and assemble

your tandem. After this you can refer to the

Owner's manual to help with adjustment and more

comprehensive setup.

To further help with assembling your tandem, there

are instructional videos available on the manuals

page of our website.

www.circecycles.com/products/morpheus/

manuals/

UNPACKING

Make sure that both boxes are the correct way up

before opening. Remove all the loose packaging

and any loose parts from around the bike. Remove

the tandem from the box, a second set of hands

makes this easier.

The seat, small components and accessories

comes in a separate box to the main part of the

tandem, please follow the same procedure as

above for unpacking.

NOTE - Check that everything is present and

undamaged before proceeding to assembly.

CONTENTS OF MAIN BOX

The main box should contain:

• The tandem with the captain's handlebars

folded down and to one side of the frame

• Racks* and rear stand* should be fitted to the

bike.

• Front stand* will have the main section

removed with just the struts attahced to the

frame.

• Front and rear mudguards*

• Kiddy system main body* (if ordered)

* Optional extras

CONTENTS OF SMALL PARTS BOX

The small parts box should contain the following,

however there may be additional parts in the box

depending on what has been ordered:

• Seat including support stays

• Boom with crank fitted

• Manuals, reflectors and bell

• Stoker handlebars

• Main section of Front stand*

• Pedals*

• Charger, power cable, battery, and adaptor

(Pendix only)*

* Optional extras

ASSEMBLY

Find plenty of space to lay out the parts and gather

the tools you will need.

NOTE - Only cut clear zip ties when unpacking.

TOOLS REQUIRED

• 4,5 and 6mm Allen key

• Torque wrench (Optional)

• Cable cutters or robust scissors for cutting zip

ties

Circe Cycles