Circe Cycles Morpheus Montagehandleiding - Pagina 3
Blader online of download pdf Montagehandleiding voor {categorie_naam} Circe Cycles Morpheus. Circe Cycles Morpheus 8 pagina's.
Ook voor Circe Cycles Morpheus: Gebruikershandleiding (10 pagina's)
INTRODUCTION
This manual is intended for those who have bought
their Morpheus directly from Circe Cycles and
have received their tandem packed in a box.
This manual is to help you unpack and assemble
your tandem. After this you can refer to the
Owner's manual to help with adjustment and more
comprehensive setup.
To further help with assembling your tandem, there
are instructional videos available on the manuals
page of our website.
www.circecycles.com/products/morpheus/
manuals/
UNPACKING
Make sure that both boxes are the correct way up
before opening. Remove all the loose packaging
and any loose parts from around the bike. Remove
the tandem from the box, a second set of hands
makes this easier.
The seat, small components and accessories
comes in a separate box to the main part of the
tandem, please follow the same procedure as
above for unpacking.
NOTE - Check that everything is present and
undamaged before proceeding to assembly.
CONTENTS OF MAIN BOX
The main box should contain:
• The tandem with the captain's handlebars
folded down and to one side of the frame
• Racks* and rear stand* should be fitted to the
bike.
• Front stand* will have the main section
removed with just the struts attahced to the
frame.
• Front and rear mudguards*
• Kiddy system main body* (if ordered)
* Optional extras
CONTENTS OF SMALL PARTS BOX
The small parts box should contain the following,
however there may be additional parts in the box
depending on what has been ordered:
• Seat including support stays
• Boom with crank fitted
• Manuals, reflectors and bell
• Stoker handlebars
• Main section of Front stand*
• Pedals*
• Charger, power cable, battery, and adaptor
(Pendix only)*
* Optional extras
ASSEMBLY
Find plenty of space to lay out the parts and gather
the tools you will need.
NOTE - Only cut clear zip ties when unpacking.
TOOLS REQUIRED
• 4,5 and 6mm Allen key
• Torque wrench (Optional)
• Cable cutters or robust scissors for cutting zip
ties
Circe Cycles
3