Axxess AX-DSPX-WR Manuel d'instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Axxess AX-DSPX-WR. Axxess AX-DSPX-WR 20 pages. Axxess 10-channel digital signal processor with water resistant case
Imprimer la page
PREFACE
In the following section, Installation Options, choose the installation type, then either click
on the hyperlink, or reference the page number.
The AX-DSPX-WR provides a 12v 1-amp output to turn on an aftermarket amplifier. If
installing multiple amplifiers, an SPDT automotive relay will be required if the current
exceeds that amount. Use Metra part number E-123 (sold separately) for best results.
The AX-DSPX-WR can also grow as your stereo system grows. Start off by adding a
subwoofer, then add on from there. Simply reference the Installation Options page to
change the AX-DSPX-WR to the new system. All 10 channels of the AX-DSPX-WR can be
assigned however needed for the installation at hand. If 10 channels of a subwoofer signal is
needed, the AX-DSPX-WR can do it.
2
INSTALLATION OPTIONS
Aftermarket radio system:
The AX-DSPX-WR can be used with an aftermarket radio to improve the overall listening
experience for car audio enthusiasts. Installers will connect the RCA inputs from the AX-DSPX-WR
to the outputs from the aftermarket radio; Front, Rear, Sub (sub is optional).
(refer to page 4)
Adding a subwoofer to an existing radio:
This feature offers the Installer the ability to add an aftermarket subwoofer to an existing radio.
(refer to page 5)
Full range system to an existing radio:
This option allows the Installer to wire the AX-DSPX-WR directly to the speaker outputs from an
existing radio for a full range audio signal (high-level).
(refer to page 6)