Axxess TRIGGER Manuel d'instructions d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Axxess TRIGGER. Axxess TRIGGER 19 pages.

TRIGGER

Notes:

*Pin 1 needs to be attached to ground and pin 11 needs to be attached to 12 volt

constant on all configurations listed below.

* Metra recommends using a single pulse double throw relay in every application.

(Metra part # E-123)

Pin diagram

Pin 1: Black (Chassis Ground)

Pin 2: Purple (Configuration input)

Pin 3: White (Configuration input)

Pin 4: Pink (Configuration input)

Pin 5: Orange (Configuration input)

Pin 6: Green ((-) Output 500mA Max)

Pin 7: Red ((-) Output 500mA Max)

Pin 8: Blue ((+) output 2 amp Max)

Pin 9: Brown (+ 0.8- 16v input trigger)

Pin 10: Gray (- input trigger)

Pin 11: Yellow (12 volt Constant/Switched)